When I had my first stroke in 2015, I lost my peripheral vision on my left side. It keeps me from driving and is a pain when shopping because when I am shopping and looking at the right shelving, if I don’t look to my left occasionally I would not see things or people in the aisle. So, I can run into things occasionally. So, I have thought up a device to let me know that something or someone is in my blind spot. So I am going to build a prototype and see if I can get it to work as I envision.Just another project to work on.

I know that much of ny material is rather scientific and may be rather hard to understand. I have tried to make it as understandable as possible. Have I succeeded? If you have any questions about anything, please let me know so I can try to clear it up. I included a primer on electricity for that reason. When I was in engineering school, I was with a lot of people smarter than me. They easily understood things that I had trouble with, so I understand what that is like. And of course there are different learning styles and repetition is also important. To me it is all easy to understand and makes perfect sense.But you are not me. I am happy to answer any questions you may have.You can reach me at mark@vackent.com.

If you want to learn how to do my style of acupuncture, this is the book for you! I explain how to do all the treatments I use in my clinic correctly and explain why you should do it that way, the scientific way. Buy e-book version here, Buy paperback version here. And you can get my first book here.

Heat (infrared radiation) from moxa or a heat lamp will cause increased buildup of structured water. That will cause an increase in the positive charge of the bulk water in the meridians and lymph ducks. That in turn will cause an increase of flow in the channels towards the chest. This then can cause a reduction of edema and a flushing out of toxins from the tissues. These effects are best achieved by applying the heat above the problem area. For example for edema or peripheral neuropathy in the lower legs, put the heat on the knees. this should not be the only treatment but as another way to add to the effect in addition to proper needling and possibly FSM. This will enhance the effect of needling and FSM.

This has to do with structured water. Since the needle is made of stainless steel, it is hydrophilic. Because of that, structured water will naturally form on the needle when it comes in contact with extracellular fluid.This then puts a negative charge around the needle shaft. Thus drawing even more water to the needle through electro-osmosis. And attracting even stronger elements of the immune system that have a positive charge. If the muscles in the area are tight or spasmy, the negative charge will encourage structured water formation an thus relax the muscles as explained elsewhere.

If so, I would like to hear them. So far, I have not received even one! So either you have none or you don’t care enough to express them. Either way, Scientific Acupuncture is the future of acupuncture because it simply works better. BECAUSE it uses the way it works!

As I think about it ,it occurred to me that the EZ formation may even be responsible for the formation of the meridians themselves. Let me explain how this can be possible, even probable. First, let us assume that cellular structure occurs at random. Unless some ordering process is at work, the boundaries between the cells would occur randomly. Now, no matter how the cell to cell boundaries are organized, they all are mostly made up of hydrophilic surfaces. Thus, they will naturally build EZ layers and produce H³O⁺which will accumulate in the extra-cellular spaces. Being of like charge, they will repel from each other, producing a pressure pushing the cells apart. The electric charge potential of the whole body pulls the positive charged H³O molecules towards the center of the body. Those combined forces can possibly make the spaces between the cells to form into channels. Building EZ layers between the cells would further increase the process. And, Wala, acupuncture meridians. The lymphatic ducts may even form starting with this process.

I have recently figured out a few things about making treatment remedies of FSM protocols . First I figured out a way to make individual bottles for FSM instead of a bunch at a time. It turns out that I can just put the treatment bottle on my Earthing plate that I also use for remote FSM treatments and run the protocol through the plate and it will imprint on the water/alcohol mix in the bottle. That way, I can make a custom protocol for someone and make a treatment bottle of it with no fuss. In addition, I have figured out how to get past the limitations on how long a protocol can be imprinted. I even know how to get past that limitation for Bach Remedies as well. All it took was to research structures water to understand it better and then use my training as an electrical engineer to understand how to get past the supposed limitations. And every indication is that it works! I have managed to make a remedy of a protocol that is 1-1/3 hours long. and I hope to get it up to 1-1/2 to 1-3/4 hours. We shall see. But since many of the protocols that have been developed are less than 1-1/3 hours long, this can be very useful to do. It can allow a patient to treat themselves at home which can help extend the time between visits. Saving them money. Remote visits can do the same thing.

And I have also discovered a way to make the remedies work even better! It turns out that if you put their picture on the plate when making the remedy, it makes it work faster and stronger. Who knew? I found out entirely by accident one day. A patient wanted another bottle of a customized Relax and Balance protocol she was using to help her get to sleep. So I ran it remotely instead of on her directly to kill two birds with one stone. To both of our surprise, it worked much better than usual. At first I thought it might be due to her field interacting with the process (a person’s field typically extends about three feet out from their body), but further experiments with another patient proved it was just the picture that made all the difference. My current thinking is that it must be like getting two different treatments at the same time. All I know for sure is that it really makes the treatment work much better.

Being an acupuncturist AND an electrical engineer has proven useful once again.

#FSM, #Frequency Specific Microcurrent, #FSM remedies

I was just doing some research on the subject and came upon a few realizations that are worth sharing. Structured water forms naturally off of hydrophilic surfaces (which are abundant in the body). So structured water exists everywhere in the body and we have no idea what it does! There is some evidence that it is partly responsible for the phase transitions that are involved in much of cellular functions. It is sensitive to light (especially the infrared wavelengths) which makes the region grow faster. So if you are trying to imprint information on it, the limit to the amount of information that can be stored depends on the size of the structured water with the information stored on the molecular bonds. The real limits are the size of the hydrophilic surface and amount of water adjacent to it that can be turned into H3O2. Past that is how long the frequencies are run and at what current. For a Bach Remedy, if you want to use 8 or more remedies in a treatment bottle, you just have to sucuss it longer to supply more energy and more time to get it to imprint. Do you understand? For FSM remedies, you are limited somewhat pairby the length of time a protocol is run. You just have to make sure each pair of frequencies is run for enough time depending on the current level the protocol is run at. I know so far you need 5 minutes per pair at 100uA works well. My guess is that 3 minutes at 200uA will probably work but I have not tried that combination yet. Basically, it takes time to lay down the layers of structured water down, but putting more energy into the system will speed up the process somewhat. That’s what I get from the research so far.

Now I am trying to use a protocol I made to treat polyps and skin tags that I know works on me. I made a treatment bottle with every frequency pair run for either 5 or 10 minutes. And for good measure I ran it at 200uA. I will take the drops instead of running it remotely until my next colonoscopy. Hopefully I will have no polyps. I will have it in March. Run directly, it got rid of 2 large polyps I could palpate, so I know that works because I could feel them get smaller and finally disappear.